MULTI-WHEEL DTM CLEAR is a specially formulated 2K clearcoat for use on metals and some cases plastics. This clearcoat is especially suited for direct application to bare alloy wheels and also has great adhesion on plastic headlights and tail lights.

Unlike other ‘DTM’ clearcoats on the market this clear is actually formulated using special resins that have been laboratory tested on various metals and plastics for adhesion.

Due to the solid content of this clearcoat it means that we was unable to make this a 2:1 clear but instead made it a 3:1 mix with HS Hardener. This was to keep the solid content high and reduce the solvent content. This clearcoat is extremely durable and can be used in many different applications. Anywhere were durability is needed but high gloss such as Alloy wheels, headlights and taillights or even door handles.

It is best used without thinner but up to 10% may be added for certain applications. Try adjusting spraying equipment first.

This clear is best used on the below substrates:




Cold rolled steel

Stainless Steel

Zinc plated steel


Specifically good on ABS and PVC

Not recommended on PP/Talc, PE or PP/EPDM

It is always best to try out a sample and test for adhesion yourself. This can be done by applying the clear and baking leaving it a day to cool and finish curing and using a blade to cross hatch the clear and apply tape and remove.

As with all DTM clears, this does not provide any anti- corrosive properties. This works by creating a barrier effect over the substrate to stop the metal from oxidising.

Sizes available: 1.5L, 7.5L

Part numbers:

1.5L kit = MMC3/1.5

7.5L kit = MMC3/7.5


Shopping Cart
Scroll to Top